■ 138 ft Vertical Reach
■ Special Telescopic Diagonal
■ Outrigger Design for Quicker Setup
■ Fully Integrated Boom Pedestal
■ High Volume Outputs and High Pressures
■ Free Flow Hydraulics
Specifications
Boom Specifications ¥ Roll and Fold Design |
|
Height & Reach |
|
| Vertical reach | 136’10” (41.70m) |
| Horizontal reach | 124’8″ (38.00m) |
| Reach from front of truck* | 115’10” (35.30m) |
| Reach depth | 96’6″ (29.41m) |
| Unfolding height | 32’6″ (9.90m) |
4-Section Boom |
|
| 1st section articulation | 99⁰ |
| 2nd section articulation | 180⁰ |
| 3rd section articulation | 180⁰ |
| 4th section articulation | 255⁰ |
| 1st section length | 33’4″ (10.16m) |
| 2nd section length | 30’10” (9.40m) |
| 3rd section length | 30’2″ (9.19m) |
| 4th section length | 30’4″ (9.25m) |
General Specs |
|
| Pipeline size (ID) metric ends | 5″ (125mm) |
| with couplings | 5.5″ (140mm) |
| Rotation | 365⁰ |
| End hose-length (heavy duty) | 13′ (4m) |
| End hose-diameter | 5″ (125mm) |
| Outrigger spread L-R-front telescopic diagonal | 26’3” (8.00m) |
| Outrigger spread L-R-rear swing out | 26’3″ (8.00m) |
Pump Specifications |
42X.16H | 42X.20H |
| Output- rod side | 210 yd3/hr (160m3/hr) | __ |
| piston side | 146 yd3/hr (112m3/hr) | 260 yd3/hr (200m3/hr) |
| Pressure- rod side | 1233 psi (85 bar) | __ |
| piston side | 1885 psi¥ (130 bar)¥ | 1233 psi¥ (85 bar)¥ |
| Concrete cylinder diameter | 9″ (230mm) | 11″ (280mm) |
| Stroke length | 83″ (2100mm) | 83″ (2100mm) |
| Max strokes per minute- | ||
| rod side | 31 | __ |
| piston side | 21 | 26 |
| Volume control | 0-Full | 0-Full |
| Vibrator | Standard | Standard |
| Hard chromed concrete cylinders | Standard | Standard |
| Hydraulic system | Free Flow | Free Flow |
| Hydraulic system pressure | 5075 psi (350 bar) | 5075 psi (350 bar) |
| Differential cylinder diameter | 5.5″ (140mm) | 5.5″ (140mm) |
| Rod diameter | 3.1″ (80mm) | 3.1″ (80mm) |
| Maximum size aggregate | 2.5″ (63mm) | 2.5″ (63mm) |
| Water tank – pedestal | 211 gal (800L) | 211 gal (800L) |
Truck Mounted SpecificationsBased on Model Mack MR 688S |
||
| Length | 42’11″ (13.08m) | |
| Width | 8′ 2″ (2.50m) | |
| Height | 12′ 11″ (3.93m) | |
| Wheelbase | 293″ (7442mm) | |
| Front axle weight | 32,400 lbs (14,696kg) | |
| Rear axle weight | 38,500 lbs (17,464kg) | |
| Approx total weight | 70,900 lbs (32,160) | |
Diagrams
 |
 |